Sliding Rheostats,Adjustable resistor Double-tube, 2-8A,23-380Ω
Description of Sliding Rheostats:
This series adjustable resistors are constructed of 2 wirewound tubes can be powered with about 65% of the corresponding nominal load of the fixed types with corrugated wire for extra high demands on surge or pulse load. They are wirewound enameled or cement coated resistors with an open area along the resistors where the resistor wire is un-coated.
Key Features of Sliding Rheostats:
1.Long term high stability
2.non-inductive or inductive type options
3.high operating voltage(up to 1.2KV) and high power ratings(up to 30KW)
4.terminals suitable for soldering or bolt connection
5.Available covered in stainless steel AISI 304. Case made in zinc plated steel or in stainless steel or in aluminum plated steel if requested.
Characteristics of Sliding Rheostats:
1.Rated current:2-8A
2.Resistance values: from 23Ω to as high as 380Ω
3.Temperature Coefficients:25,50 and 100ppm/℃ or as required
4.Operating Temperature:-55℃ to +225℃
5.Insulation Resistance: >1000MΩ (500V 25℃ 75% relative humidity)
6.Dielectric strength: >3.0KV 50Hz 1min(25℃ 75% relative humidity)
7.IP protection: IP00, IP20 or as required
8.Element material: OCR25AL5/CrAlFe/CrNi/CuNi
9.Lead material: Brass Caps(lug terminations available)
10.Encapsulation: Silicone conformal coating
Application of Sliding Rheostats:
1.simulation load testing, capacitor charging & discharging,
2.automation control , inverter's energy loss brake,
3.crane systems, various steel mill applications and transit applications, neutral grounding.
4.filter,electrical machinery general use, available through distribution
Resistor | |
IP Class | IP20 |
Nominal Current range(A) | 2-8 |
Resistance Range (Ω) | 23-380 |
Certificates : http://sikes-elec.com/Certificates.html
This is a Demo Shop. You can place your order, but please contact us before you pay.